<em id="rpn9l"></em>

<noframes id="rpn9l"><form id="rpn9l"><th id="rpn9l"></th></form>

    <noframes id="rpn9l">

    <noframes id="rpn9l">

    <address id="rpn9l"><address id="rpn9l"><nobr id="rpn9l"></nobr></address></address>
      主營產品:

      便攜式焦爐紅外測溫儀,毛細吸水時間測定儀,深視力檢測儀,石油產品凝點測定儀,磷酸根分析儀,玻璃密度比較儀

      產品資料
      產品[

      汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀恒奧德

      ]資料
      如果您對該產品感興趣的話,可以 sendmsg
      產品名稱: 汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀恒奧德
      產品型號: NTP1-HPC201
      產品廠商: 恒奧德
      產品文檔: 無相關文檔
      簡單介紹
          

      汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀恒奧德 用于測量汽車排放廢氣中的HC及CO氣體濃度,采用外術,口關鍵零件組裝而成。具有亮度數碼顯示,自動校零,自動數據線性化處理

      汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀恒奧德 的詳細介紹
      汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀恒奧德

      汽車排氣分析儀 排氣分析儀 汽車排氣檢測儀 型號:NTP1-HPC201

      主要能點:
        
          用于測量汽車排放廢氣中的HC及CO氣體濃度,采用外術,口關鍵零件組裝而成。具有亮度數碼顯示,自動校零,自動數據線性化處理,氣路阻塞時自動報警,故障時自動診斷所在單元,打印測試之日期、時間能,配內置打印機(或模擬輸出接口或RS-232A數字串行通信接口),可行自由怠速和雙怠速測量,具有操作方便,測量數據準確,作穩定可靠等點。
      主要術參數:
       
       
       
       
       
       
       
       
       
       
       
      測量范圍              HC:0~10000×10-6(ppm)vol
         CO: 0~10   ×10-2(%)vol
      示值誤差              HC±12  ×10-6(ppm)vol(對誤差)或±5%(相對誤差)
         CO±0.06×10-2(%)vol    (對誤差)或±5%(相對誤差)
      穩定性                自動校零,量矩漂移≤±3%
      重復性                重復誤差≤±2%
      分辨率                HC:1×10-6(ppm)vol
                            CO: 0.01×10-2(%)vol
      響應時間              95%響應不大于10秒
      預熱時間              8min(可預熱3min應急檢測)
      輸出方式              數字直讀顯示,可附打印機打印氣體名稱,濃度*值、平
                            均值、*小值,測試時間、日期等。可附接口與計算機聯網
      環境條件              溫度0~40℃,相對濕度≤90%
      電源                  AC100-240V 50Hz 或DC12V(選加電源逆變器)
                            消耗率50VA
      外形尺寸              420mm(長)×310mm(寬)×170mm()
      重量                  約9kg
       
      Main Features:
      Used to measure vehicle emissions of HC and CO gas concentrations, using advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with easy operation, accurate measurement data, work stable and reliable characteristics.
       
      Main technical parameters:
      Test ScopeHC010000×10-6ppmvol
      CO010  ×10-2(%) vol
      Shows the value errorHC ± 12×10-6ppmvol (absolute error)or± 5% (relative error)
      CO± 0.06×10-2(%) vol   (absolute error)or± 5% (relative error)
      Stability     Automatic zero, volume moments drift ≤ ± 3%
      Repeatability
      Repeat error ≤ ± 2%
      Resolution
         HC1×10-6ppmvol
      CO0.01×10-2(%) vol
      Response Time95% of the response to no more than 10 seconds
      Warm-up Time8 minMay the preheating 3min urgent examination
      Output ModeDigital direct-reading show that gases can be attached printer name, the
      concentration maximum, average and minimum test time, date, etc.. Can be attached to interface with the computer network
      Environmental conditionsTemperature 0 ~ 40 , relative humidity ≤ 90%
      Power
      AC100-240V  50Hz or DC12V (select plus power inverter) Power
      consumption 50VA
      Dimensions
      420mm (length) × 310mm (width) × 170mm (H)
      Weight
      About 9kg
       
      www.51658042.com
       


       

      產品留言
      標題
      聯系人
      聯系電話
      內容
      驗證碼
      點擊換一張
      注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
      2.如有*,請您留下您的詳細聯系方式!

      Copyright? 2003-2025  北京恒奧德儀器儀表有限公司版權所有
          電話:15010245973微信同號/010-51658042    傳真:    地址:    郵編:
      京ICP備10012662號-9    
      伊人蕉久中文字幕无码专区